car UAZ-3151
UAZ vehicles are equipped with a four-cylinder, four-stroke, overhead valve, carburetor engine with liquid cooling
If the oil pump parts wear out a lot, the pressure in the lubrication system decreases and noise appears
Place the vehicle on a platform or inspection ditch to gain access from below to the gearbox and clutch
Fill the hydraulic drive only with special brake fluid according to the instructions in the lubrication table in the following order:
Motor power supply system diagrams are shown in Fig. 1, 2, 3.
The reliability and durability of the engine, as well as the dynamic performance and efficiency of the vehicle as a whole largely depend on the state of the power system.
After disassembling, thoroughly rinse all gearbox parts in kerosene, blow with compressed air and inspect
Disassemble the bridge in the following order:
Install the bridge on the stand (Fig. 1), unscrew the oil filler and oil drain plugs and drain the oil.
