car UAZ-3151
Maintenance of the rear axle consists of maintaining the oil level in the crankcase and timely replacing it, checking seals, timely detection and elimination of axial clearances in the final drive gears
Periodically check the condition of springs, suspension springs and shock absorbers, their fastening and eliminate any identified faults
Remove and disassemble the pressure regulator in the following order:
Disconnect the lines leading to the regulator.
Repair of connecting rods comes down to replacing the upper head bushing and then processing it to fit a piston pin of a nominal size or to processing the bushing available in the connecting rod for a repair-size pin
Parts and kits of nominal and repair sizes of the UAZ-3151 engine
Table 1
Part or kit number – Name - Nominal or repair size (diameter), mm
Maintenance of the fuel filter-sump
Periodically drain the dirt and water through the drain hole (Fig. 1)
Place the vehicle on a platform or inspection ditch to gain access from below to the gearbox and clutch
