Disassemble the transfer case in the following order:

The hydraulic clutch release (Fig. 1) of vehicles of the UAZ-31512 family consists of a suspended pedal 19, a master cylinder 5, a hydraulic pipe 4, a hydraulic hose 24 and a working cylinder 25

Disconnect the wire from the negative terminal of the battery.

Install the piston of the 1st cylinder in the idle position. compression stroke.

The tanks are attached to the frame side members from the outside using brackets and clamps. Cardboard spacers are placed between the clamps and the tank

If significant wear, damage and other faults appear on the hubs, wheels, remove them from the car, disassemble them, check the condition of the parts and their suitability for further work

Transistor switch type 131.3734 or 90.3734 is installed on the car on the left mudguard behind the battery