repair Niva Chevrolet
Carry out all checks and work from underneath the vehicle, installed on a lift or inspection pit (with the front wheels raised)
The condition of the belt tension rollers should always be checked when removing or replacing the drive belt
Generator type 9402.3701-01 alternating current, three-phase, with built-in rectifier unit and electronic voltage regulator, right-hand rotation (drive side)
You will need: 13 mm, 17 mm, 27 mm wrenches, and a lug wrench.
Disconnect the front propeller shaft from the front axle gearbox (see "Removing and lubricating the Niva propeller shaft").
If the chain tension cannot be restored with a serviceable tensioner and its shoe, and with unworn drive sprockets, then the chain has stretched excessively and must be replaced
Independent front suspension, on two wishbones on each side, with coil springs, telescopic shock absorbers and anti-roll bar
