The turn signal switching diagrams are shown in Fig. 1 and 2.
The sidelights and taillights are switched on using a switch of the P105 type on the GAZ-53A vehicle and a P118 type on the GAZ-66 vehicle
Wash the bearings in diesel fuel. Check the running surfaces of the outer and inner races and the bearing cage
Preparing and washing engine parts
In this article we will look in detail at how to assemble an oil filter with a spacer
Full-flow oil filter with replaceable filter element “Regotmas 440A-1-06”
All parts received for assembly must be cleaned of dirt, carbon deposits and scale, degreased, washed and dried
Oil channels and holes in parts must be cleaned, washed under pressure and blown with compressed air.
The GA3-66 vehicle is a two-axle truck, with a payload capacity of 2 tons, all-terrain, with drive on both axles. It is designed to replace the same type of GAZ-63 car produced by the plant