Ural car
One of the characteristic signs indicating the need to disassemble and adjust the gearbox is increased noise when the vehicle is moving. Causes of increased noise:
The design of the wheel part and the steering knuckle assembly of the front drive axle is shown in Fig. 1
Ural vehicles have three independent brakes: a service brake with a hydropneumatic drive on all wheels, a parking brake with a mechanical drive acting on the transmission, and an auxiliary compression type installed on the pipelines of the gas exhaust system
Compressor (Fig. 1) piston type, indirect flow, two-cylinder, single-stage compression
Air from the engine air filter enters the compressor cylinders through the vane inlet valves.
The pressure regulator is designed to regulate the pressure of compressed air supplied from the compressor
The two-section brake valve (Fig. 1) is designed to control the actuators of the vehicle’s service brake system, as well as to control the trailer brake drive valve
Service brakes are disassembled during maintenance and troubleshooting (oiling, wear and tear of brake pad linings, wear or damage to the sealing collars of wheel cylinders, breakage of the tension spring, etc.)
