Maintenance of the rear axle consists of maintaining the oil level in the crankcase and timely replacing it, checking seals, timely detection and elimination of axial clearances in the final drive gears

The air filter (Fig. 1) is a dry type with a replaceable filter element made of synthetic non-woven material, installed on the engine on the right side in front of the carburetor and connected to the latter using a rubber coupling, secured to the carburetor with a wire clamp

Repair the carburetor if any of its parts break or if the carburetor performs unsatisfactorily after adjustment in all engine operating modes

Possible pump malfunctions may include: leakage of the diaphragm and valves, decreased elasticity or breakage of the diaphragm spring, wear of pump drive parts

Maintenance of the fuel filter-sump

Periodically drain the dirt and water through the drain hole (Fig. 1)

Assemble the transfer case from a subassembly of its components