Preparing the car for work. Disconnect the negative battery terminal
Disconnect the airbag ECU using the diagnostic tool.
Removing the driver's airbag module (DAM).
Remove the steering wheel, steering wheel covers, steering column switches, steering column adjustment handle and transponder receiving ring.
After overcoming the resistance of the clamps, fold back the decorative plug 1, figure 2, unscrew the screw 2 and remove the rear part of the floor tunnel trim 3 (flat-head screwdriver, replaceable Torx T20 head, ratchet).
Unscrew the two screws 1, Fig. 3, fastening the front part of the floor tunnel trim (replaceable Torx T20 head, ratchet).
Unscrew nut 4, figure 4, and two screws 1. Remove gear shift lever cover 5.
Disconnect the wiring harness connector from the cigarette lighter 2 and remove the front part of the floor tunnel trim 3 (replaceable head 10, replaceable head Torx T20, extension, ratchet).
Remove the central trim 1, Fig. 5, of the instrument panel, overcoming the force of the clamps.
Disconnect the wiring harness blocks from the switches, remove the trim.
Remove the plug from the central console of the instrument panel or the radio with a CD player 2, disconnect the wiring harness blocks and the antenna (removal tool for the radio and CD player).
Remove decorative trims 1 and 3, Fig. 6, overcoming the force of the clamps.
Unscrew the two screws 2 for mounting the instrument cluster visor and remove it, overcoming the force of the clamps (replaceable Torx T20 head, ratchet)
Unscrew four screws 1, figure 7, securing the instrument cluster 2.
Disconnect the two wiring harness connectors and remove the instrument cluster (replaceable Torx T20 head, ratchet).
Remove the left 1 and right 5 windshield pillar trims (see figure 1), overcoming the force of the clamps.
Remove handle 4, Fig. 8. Unscrew two screws 3 securing regulator 2 of headlight corrector, remove it from the hole in the instrument panel (replaceable Torx T20 head, ratchet).
After overcoming the force of the clamps, fold back decorative plugs 5 and unscrew one screw 1 of the lower instrument panel mount on the left and right (replaceable Torx T20 head, ratchet).
Unscrew screw 1, Fig. 9, securing the instrument panel through the window that opened after removing the radio and CD player (replaceable Torx T20 head, extension, ratchet).
Unscrew the two screws 1, Figure 10, securing the heating, air conditioning and ventilation control unit 3 to the instrument panel, squeeze the clips 2 and push the unit into the instrument panel (replaceable Torx T20 head, ratchet).
Unscrew the two screws 2, Fig. 11, fastening the instrument panel 1 to the heater housing (replaceable Torx T20 head, extension, ratchet).
Unscrew one screw 1 on the right and one on the left side, figure 12, of the upper instrument panel mount 2 (replaceable Torx T20 head, ratchet).
Remove the instrument panel.
When removing, remove the diagnostic connector from the socket in the glove compartment and disconnect connector 1, Figure 13 (remove with an assistant).
Unscrew the four nuts 2, Fig. 14, securing the passenger airbag module 1, disconnect the wiring harness block 3 and remove the passenger airbag module (replaceable head 10, ratchet).
Remove the outer ring 1, figure 15, of the ventilation nozzle.
Remove the inner ring 2 of the ventilation nozzle and, having pressed three fasteners 3, remove the housing 4 of the ventilation nozzle from the instrument panel
Install the removed parts in the reverse order of removal.
Unlock the airbag ECU using a diagnostic tool.