All consumers are connected to the power source using a single-wire circuit, with the exception of the glove box lighting, the “-” output of which is displayed on the fuse panel
The inclusion of the dipped and main beam headlights, fog lamps and parking lights is carried out by a combined switch directly from the power sources through an ammeter.
It is designed to ensure the possibility and safety of the car, as well as to illuminate the driver's workplace at night and in conditions of insufficient visibility.
The system of external and internal lighting of the car includes headlights, fog lights, front lights, rear lights, engine compartment lamp, ceiling lights for the glove box and bed, cartridges with instrument lighting lamps, cab lights, portable lamp.
All consumers are connected to the power source using a single-wire circuit, with the exception of the glove box lighting, the “-” output of which is displayed on the fuse panel.
The inclusion of the dipped and main beam headlights, fog lamps and parking lights is carried out by a combined switch directly from the power sources through an ammeter.
The dipped beam circuits of the headlights and fog lamps are protected by thermal bimetallic fuses of the same type (PR 310).
The high beam circuit is protected by a separate fuse of the same type.
The circuit of side lights and instrument lighting lamps is protected by another type of automatic thermal bimetallic fuse (13.3722)