Cylinder liners are “wet” type, made of special wear-resistant cast iron

A high-pressure fuel pump (HPF) of the “Compact-40” type with an electronic control system (ECS) assembled with an actuator mechanism, a fuel priming pump and a damper clutch is shown in Figure 1

The first maintenance of injectors is carried out after 250 hours of operation from the start of engine operation

Inspect the cylinder block. If it has cracks, it needs to be replaced

To compensate for the thermal expansion of the valve, a gap is set between the end of the valve stem and the camshaft cam.

According to factory recommendations, the alternator belt should be replaced after 15 thousand km