engines
Cylinder liners are "wet" type, made of special cast iron
Crankshaft - steel, made by hot stamping.
All surfaces of the shaft are nitrided and the depth of the nitrided layer is at least 0.35 mm.
The power unit, depending on the model and configuration, can be equipped with a gearbox of several models and different configurations
Before installing the demultiplier with a spacer on the crankcase of the main box and the spacer on the crankcase of the demultiplier, apply the anaerobic sealing compound UG-6 TU 6-01-1285-84 to the gaskets on both sides with a continuous strip 2-3 mm wide along the contour
Proper operation of the gearbox and its service life are directly dependent on the culture of operation, so you need to carefully consider all routine maintenance provided for in this manual
Since September 2004, Avtodiesel OJSC has switched to equipping YaMZ engines that meet Euro-1 and Euro-2 requirements with fan drives equipped with an electromagnetic switch
The power unit, depending on the model and configuration, can be equipped with a clutch of several models
