repair Niva Chevrolet
The vehicle is equipped with a liquid-type heater 12 (Fig. 1), combined with the engine cooling system
The diagram of the rear window heating system is shown in Fig. 1.
You will need: wrenches "10", "13", "14", "17", "19", "21", "22", "36" (or a special wrench for the crankshaft pulley fastening nut, if you don't have such a wrench, you can use a gas wrench), socket heads "12" and "13" (or a special wrench for the cylinder head fastening bolts), screwdriver, hammer, oil filter remover.
The torque is transmitted to the front wheels from the front axle gearbox through the right and left drives
If the chain tension cannot be restored with a serviceable tensioner and its shoe, and with unworn drive sprockets, then the chain has stretched excessively and must be replaced
The pressure regulator (Fig. 1) regulates the pressure in the hydraulic drive of the rear brake mechanisms depending on the load on the rear axle of the car
In some vehicle configurations, it is possible to install an electromechanical power steering