Install and prepare the car for work
Remove the negative battery terminal.
Remove the air filter housing
Disconnect the cable from the throttle pipe.
Using an 8 mm socket, unscrew the two bolts
Remove the throttle pipe.
Installing the throttle pipe
Before installing the throttle pipe, install a new gasket on it, having previously lubricated it with engine oil.
Install the throttle pipe 1 on the car, screw in and tighten the mounting bolts.
The tightening torque of the bolts is 14 Nm (1.4 kgf.m) (replaceable head 8, extension, ratchet, torque wrench).
Connect the drive cable to the throttle pipe.
Install the air filter housing and intake noise muffler.
Connect the negative terminal of the battery.