car GAZ-3110
Replacement of handles and locks GAZ-3110
Inner door lock handle
Remove door trim
Unscrew the two fastening screws and remove the top plate 1
Low idle speed:
- - Engine idle speed adjustment is incorrect (See Adjusting the K-151 carburetor of the GAZ-3110 car) Adjust the idle speed
Disassembling the synchronizer
Check for the presence of aligned marks on the hub and sliding clutch of the synchronizer and, if not, mark them
An external sign of wear on the valve stem seals is the short-term appearance of blue smoke from the exhaust pipe after starting the engine, as well as when braking the engine after prolonged driving under load
Removing and installing the rear suspension spring of GAZ-3110
Disconnect the lower shock absorber mounting.
Unload the spring and install a stop under the rear axle.
