car GAZ-3110
Replacing the rubber bushings of the lower arms of the GAZ-3110
Install the car on a lift or inspection ditch
Removal and installation of brake pressure regulator GAZ-3110
The pressure regulator is attached with two bolts to a bracket in the rear of the body
The crankshaft is turned by the starter, but the GAZ-3110 engine does not start
Problems with starting a car engine can be divided into two main groups depending on the degree of engine heating
The car has two independent braking systems: service and parking
The front wheel brakes are disc, with a single-piston floating caliper (when braking, the piston presses the inner pad to the disc, and the caliper, moving in the opposite direction, presses the outer pad).
Disconnect the pusher from the clutch pedal in the passenger compartment by unscrewing nut 1 and removing the pusher axle 2 with two plastic bushings
