car GAZ-2705
The vehicle is equipped with a rear axle with a stamped-welded banjo-type crankcase with a separately mounted gearbox
The technical condition of the steering can be approximately determined by the amount of free play (play) of the steering wheel
A pressure reducing valve is a container separated by a diaphragm on which a valve is attached that closes the fuel drain hole under the action of a spring
With the engine running and the vacuum booster in working order, the brake pedal when braking should not reach the floor of the cabin - the gap between the pedal and the floor should be at least 40 mm
Disconnect the wire from the negative terminal of the battery
Disconnect the accelerator cable from the throttle sector
Brake light switch
The brake light switch is installed on the side of the brake pedal
Electrical equipment diagram of GAZ-3302 and GAZ-2705 cars with ZMZ-406 engines
Scheme GAZ 2705
