engines
Replacing the front crankshaft oil seal
If you find traces of oil leakage through the crankshaft oil seals, first check to see if the crankcase ventilation system is clogged and if its hoses are pinched, and repair if necessary.
A high-pressure fuel pump (HPF) of the “Compact-40” type with an electronic control system (ECS) assembled with an actuator mechanism, a fuel priming pump and a damper clutch is shown in Figure 1
The first maintenance of injectors is carried out after 250 hours of operation from the start of engine operation
We replace the timing belt every 75,000 km or if it shows signs of wear and undercutting of teeth, cracks, delamination of rubber and fabric base
Engine - gasoline, four-stroke four-cylinder in-line with an overhead camshaft and liquid cooling
You will need: a hex wrench “6”, heads “12”, “13”, “14”, a small chisel, a hammer
Drain the engine oil and coolant, remove the mudguard and accessory drive belt
