Crankshaft - steel, made by hot stamping.
All surfaces of the shaft are nitrided and the depth of the nitrided layer is at least 0.35 mm.
The power unit, depending on the model and configuration, can be equipped with a gearbox of several models and different configurations
Before installing the demultiplier with a spacer on the crankcase of the main box and the spacer on the crankcase of the demultiplier, apply the anaerobic sealing compound UG-6 TU 6-01-1285-84 to the gaskets on both sides with a continuous strip 2-3 mm wide along the contour
- Features of the design and repair of the YaMZ-239 gearbox
- Features of the fan drive with a KEM 32-23 solenoid valve
- Clutch power plant YaMZ-238
- Fuel injection nozzle of the YaMZ-238 engine
- The design of the fuel system YaMZ-238
- Features of injection pump models 806 and 807
- The main parameters and characteristics of the YaMZ-6583 engine