engines

Also available:

Checking and adjusting the valve clearance must be done on a cold engine (coolant temperature 20˚С ± 5°С), with the cylinder head installed on the block

Also available:

• - it is not necessary to remove the engine to remove the cylinder head
• - to prevent damage to the paintwork of the wings of the body, it is necessary to use a special coating
• - to prevent damage to the cylinder head, before removing it, you must wait until the engine cools down

Also available:

Threaded connection / Tightening torque Nm (kgf m)

Main bearing cap bolts:

Also available:

Pressure reduction in the supply system

Remove the No. 9 fuse (fuel pump fuse) from the right fuse box.

Also available:

According to factory recommendations, the alternator belt should be replaced after 15 thousand km