Installing cylinder heads, valve rocker arms and adjusting valve clearances

The cylinder head mounting studs are screwed into the right and left rows of the cylinder block, having previously lubricated the threaded holes for the studs in the block with diesel oil

The engine consists of a crank and gas distribution mechanisms, as well as cooling, lubrication, power and control systems, and starting

Let's consider the malfunctions that may occur during engine operation:

  • - The crankshaft is not turned by the starter;

The YaMZ-236M2 and YaMZ-238M2 engines are six- and eight-cylinder models of the family of four-stroke diesel engines of Avtodizel OJSC

Cylinder block, drive units and characteristics of engines KAMAZ 740.11-240, 740.13-260, 740.14-300, 740.11-3902007 RE

Technical characteristics of engines 740.11-240, 740.13-260, 740.14-300

The cylinder heads are separate for each cylinder, made of aluminum alloy. They have water cavities communicating with the same cavities of the cylinder block, inlet and outlet channels, plug-in seats and valve guides.

Page 2 of 2