repair Niva Chevrolet
The pendulum lever is removed for repair or replacement if damaged
The axle shaft assembly with the bearing is replaced if there is increased noise from the rear wheels of the vehicle compared to normal noise both when driving straight and when turning.
In this case, there is increased axial and radial play of the axle shaft
Cars with trim levels 55 and 34 are equipped with the "Norma" remote control system for the electrical package (SDUEP)
If engine power drops, increased noise is heard, or periodic "howling" is heard when the fuel pump is running, then most likely the fuel pump is out of order
Carry out all checks and work from underneath the vehicle, installed on a lift or inspection pit (with the front wheels raised)
To do the job we will need: a can of carburetor cleaning fluid; a suitable 0.5 meter hose; a receiver sealing gasket; a 13 mm socket and open-end wrench; a 10 mm wrench; a flat and Phillips screwdriver; wires with tips for connecting to the injector
To disassemble, remove the gearbox from the car for this:
