Repair ZIL-5301

The valve is designed to maintain pressure in the brake system in case of damage to the connecting lines, compressed air consumers

ZIL-5301 steering column — adjustable in height and tilt, with an anti-theft device.

The column body is hinged on a bracket, which is bolted to the inner panel of the cabin.

The control output valve is needed to check the pressure using a pressure gauge, as well as to take off compressed air

The valves are installed in all circuits of the pneumatic brake drive of the car

Signaling device for a car with a brake drive divided on the sides

The device is located on the bracket of the left mudguard of the wing

The article shows a drawing of the parts of the pipelines and hoses of the low and high pressure power steering.

Each part is under the number of the spare parts catalog

We look at the drawing and the table shows the decoding of the part.

Injector D-245

The figure shows the installation locations of the parts and their designations according to the spare parts catalog

Page 40 of 48

New

Removal and installation of ABS units Lada Largus

Anti-lock braking system provides more efficient braking of the car by reducing the fluid pressure in the brakes at the moment of their locking

Cylinder head ZMZ-402 GAZ-2705

The cylinder head can be removed with the intake pipe and exhaust manifold. If the cylinder head is removed from an engine installed on a car, you must first perform the following operations:

  • - drain the liquid from the cooling system;