Repair ZIL-5301
Installation of fuel supply equipment ZIL-5301
The figure shows the installation locations of the parts and their designations according to the spare parts catalog
Rear wheel brakes are shoe-type, drum-type
The rear wheel hub is mounted on two cone roller bearings
The spring brake accumulator is designed to activate the rear wheel brakes when the parking brake system is engaged
The figure shows the installation locations of the parts and their designations according to the spare parts catalog.
Only clean, filtered oil specified in the lubrication chart should be poured into the power steering reservoir.
A paper filter is installed in the pump reservoir
The filter must be replaced every 40 thousand km.
The front wheel brake mechanism is a disc brake with a two-piston floating caliper.
The ventilated brake disc is mounted on the hub and secured with bolts.
The figure shows the installation locations of the parts and their designations according to the spare parts catalog
We look at the figure and the table shows the decoding of the part.
The control output valve is needed to check the pressure using a pressure gauge, as well as to take off compressed air
The valves are installed in all circuits of the pneumatic brake drive of the car
