Roll up the edge of the luggage compartment mat, providing access to the fixing parts of the luggage compartment upholstery

Removing and installing the rear bumper of a GAZ-3110 carRemoving and installing the rear bumper of a GAZ-3110 car style=

Pry off with a screwdriver and pull out the caps securing the rear luggage compartment trim. There are 8 of them

Remove rear plastic luggage compartment trim.

Снятие и установка заднего бампера автомобиля ГАЗ-3110Снятие и установка заднего бампера автомобиля ГАЗ-3110

With a 12 key, we unscrew the two bolts of the side fastening of the bumper to the rear fenders.

Unscrew one nut each with a 17 wrench on the rear buffer mounting on both sides of the car.

Removing and installing the rear bumper of a GAZ-3110 carRemoving and installing the rear car bumper GAZ-3110

Remove the bumper by pulling it towards you

If it is necessary to remove the mudguard, remove three bolts from each side of the car, as well as six bolts from the bottom

Install the bumper in reverse order. Before installation, in order not to damage the body paint, we throw a rag on both ends of the bumper.

Removing the rear bumper of the car GAZ-310221

The "universal" bumper consists of three parts: a central part and two side parts.

Remove two license plate lights from the bumper.

Removing the rear bumper of the GAZ-310221 carRemoving the rear bumper of GAZ-310221

Using a 17 key, we unscrew the four nuts from the bottom of the car

Remove the limiters for opening the cover of the spare wheel niche.

Removing the rear bumper of a GAZ-310221 carRemoving the rear bumper of the GAZ-310221 car

Use a 17 key to unscrew four nuts

Remove the central part of the rear bumper

Removing the rear bumper of a GAZ-310221 carRemoving the rear bumper of GAZ-310221

Use a 17 key to unscrew the nut from below

Using a 12 key, we unscrew the bolt in the side cavity of the spare wheel niche

Remove the side of the bumper. In the same way, remove the second side of the bumper

Removing the rear bumper of a GAZ-310221 car

Install the bumper in reverse order.