We remove the glove box when removing the instrument panel, and also when it is necessary to provide access to the controller and fuses of the engine management system
If coolant is leaking from the heater, then the radiator is leaking and needs to be replaced
To improve the appearance of the engine compartment and to reduce engine noise, a decorative plastic cover is installed
The ignition module is installed on the engine cylinder block on the left side. A faulty module cannot be repaired and must be replaced
Cause of malfunction - Method of elimination
Wire wiper motor does not work
bimetallic fuse does not operate, and fuse F9 in the mounting block does not burn out
You will need: wrenches "10", "13", "14", "17", "19", "21", "22", "36" (or a special wrench for the crankshaft pulley fastening nut, if you don't have such a wrench, you can use a gas wrench), socket heads "12" and "13" (or a special wrench for the cylinder head fastening bolts), screwdriver, hammer, oil filter remover.