If, when the engine is running, a strong noise of a rotating bearing is heard in the area under the front timing belt covers, you should check the condition of the tension roller and replace it if necessary

This can be done without removing the belt.

Also, the roller should be replaced during routine replacement of the timing belt (article - “How to check and replace the Lada Granta timing belt”).

How to replace the timing tension pulley Lada Granta

Replacing the timing roller with tension roller

Remove the front timing belt cover

When replacing the tension roller without removing the timing belt, there is a risk of the belt jumping over the pulley teeth, which will lead to a shift in valve timing.

Therefore, before releasing the belt tension, align the mark on the camshaft pulley with the protrusion of the rear belt cover.

After installing the roller, the mark should not move.

Loosen the nut securing the tension roller and unscrew it completely.

How to replace the timing tension pulley Lada Granta

Remove the roller from the pin, keeping the belt taut.

Install a new roller onto the stud and secure it with a nut and washer, preventing the belt tension from weakening.

Adjust the tension of the timing belt.

Installing the front timing belt cover.

Replacing a timing drive roller with an automatic tensioner

We prepare the car for work.

Remove the upper front timing belt cover.

After loosening the tension of the timing belt, there is a risk of the belt jumping over the pulley teeth, which will lead to a shift in valve timing.

How to replace the Lada Granta timing tension pulley

Therefore, before releasing the belt tension, by turning the crankshaft, align the mark on the camshaft pulley with the protrusion of the rear belt cover.

After installing the roller, the marks should not move.

How to replace the timing tension pulley Lada Granta

Using a 15 mm wrench, unscrewing the automatic tensioner mounting bolt half a turn, loosen the tension on the timing belt.

Unscrew the tensioner mounting bolt and remove it together with the bolt

Installation

Install the automatic tensioner without tightening the fastening bolt.

We put the timing belt on the tensioner roller, make sure that the marks match and adjust the tension (article, “How to check and replace the Lada Granta timing belt”).

Install the removed parts in the reverse order of removal.