Let's look at the main faults:
- 1 - when the engine does not start;
- 2 - when engine operation does not meet operational requirements.
Let's look at the main faults:
KAMA3-740.50-360, KAMA3-740.51-320 engines, designed for installation on single vehicles and truck tractors used as part of road trains, supplied to the domestic market and for export to countries...
Checking the effectiveness of the brake system In accordance with clause 1.1 of the “List of faults and conditions under which the operation of vehicles is prohibited”, the braking distance of a car...
Replace hoses and pipes if they are damaged
Pneumatic brake chamber ZIL-5301 On ZIL-5301 vehicles with drive separation by axles and on ZIL buses, flangeless brake chambers are used, designed to act on the main brake cylinders and installed...
Checking the effectiveness of the brake system In accordance with clause 1.1 of the “List of malfunctions and conditions under which the operation of vehicles is prohibited,” the braking distance of...
The fine fuel filter needs to be replaced every 30,000 km
The piston of the 1st cylinder is set to the top dead center (TDC) position of the compression stroke so that when carrying out work related to removing the timing chains, the valve timing is not...
Variant diagram of ZIL-5301 with addition for Euro - 2 Diagram in variant design Euro 2
