Repair of VAZ-2121
The pads need to be replaced if the thickness of the pad linings has decreased to 1.5 mm
Hang up and remove the front wheel.
We perform the work together with an assistant on an inspection pit or lift
Brake bleeding is necessary when replacing brake fluid, as well as to remove air that has entered the hydraulic drive during repair or replacement of individual components of the brake system.
Front suspension – independent, on forked transverse steel levers, with helical cylindrical springs, double-acting telescopic hydraulic shock absorbers and anti-roll bar
The principle of operation of the shock absorber is based on the creation of increased resistance to body rocking due to the forced flow of fluid through small flow sections in the valves (this applies to oil shock absorbers, while in gas shock absorbers the principle of operation is based on the pressure of gas pumped under a certain pressure)
Hang up and remove the front wheel
Use a chisel to separate the cap from the hub.
Removing the upper ball joint
The operation is performed when replacing the ball joint or the boot (dust cover) of the ball pin.
Removing the upper suspension arm and replacing the silent blocks
Hang up and remove the front wheel.
