Lada Granta repair
We carry out a compression test for a general assessment of the technical condition of the parts of the cylinder-piston group and the engine valve mechanism
Clutch - single-plate, dry, with a diaphragm-type central spring.
Located in an aluminum crankcase, structurally integrated with the gearbox and attached to the engine cylinder block.
In this article we will look at replacing the clutch cable, clutch discs, and other clutch parts
The mass air flow sensor is installed between the air filter and the throttle body
Applies to engines without hydraulic compensators
To compensate for thermal expansion of the valve stem, a gap is required between the camshaft cam and the valve tappet
Removing the front wheel drives
We carry out the work on an inspection ditch or overpass
You can replace the bearing on a car without removing the steering knuckle or by first removing the steering knuckle