The front passenger airbag is located in the instrument panel on the passenger side and consists of a folded airbag shell and a gas generator.
The passenger airbag module differs from the driver's airbag in shape and larger volume;
When installing a child seat in the front passenger seat, turn off the passenger airbag.
To turn off the airbag, open the front passenger door and turn the switch to the "OFF" position.
To remove the airbag, you need tools: key Torx T30, 10 mm socket head.
Prepare the vehicle for the task and disconnect the negative battery terminal.
Warnings:
Attempt to remove the airbag module without disconnecting its power supply may result in unexpected airbag deployment.
You can proceed with subsequent operations to remove the airbag only after the activator capacitor has been completely discharged.
To do this, you must wait at least 15 minutes after disconnecting the power supply.
Do not disassemble the airbag module.
The airbag module must not fall or come into contact with water, grease or oil.
The airbag module must not be exposed to temperatures above 95 °C.
Remove the instrument panel as described in the article – How to remove the instrument panel on a Lada Largus
Unscrew the four nuts securing the airbag module to the instrument panel
Remove the wiring harness from one holder
Remove the wiring harness from the other holder
Remove the wiring harness from the third holder on the panel
And remove the front passenger airbag module
Install the airbag module in the reverse order
Removing and installing the airbag switch
Disconnect the negative battery terminal
Open the front passenger door
Turn the switch housing clockwise
Remove the switch from the hole in the instrument panel
Squeeze the wire block retainer
And disconnect the block from the switch. Remove the switch
Install the front passenger airbag switch in the reverse order.
