Removing the front mudguards
To protect the front wheel wells of the car from dirt, plastic mudguards consisting of two parts are installed
The Niva Chevrolet car has mudguards consisting of two parts.
It is advisable to carry out the work on a lift.
Before performing the operation, you need to wash the car well.
Remove the corresponding wheel.
Unscrew the screws securing the mudguard to the side bumper parts
Remove the screws securing the fender liner to the lower part of the front bumper
Remove the nuts of the upper mount fender liner
Remove the front part of the fender liner.
Remove the mudguard mounting screws
Remove the rear fender liner mounting screw
Remove the rear part of the fender liner.
Install the fender liner parts in the reverse order removal.
To prevent corrosion, apply consistent grease to the fender liner fastening parts before assembly.
Replacing the front fender
You will need: keys "8", "10", a screwdriver.
Remove the fender liners and open the hood.
Disconnect the wire from the negative terminal of the battery.
Remove the lower and upper fender mounting screws.
Remove the side turn signal.
Remove the lower and upper fender mounting screws
Remove the headlight trim by unscrewing the screws that secure it
Unscrew the screws that secure the bumper trim and move the trim aside.
Unscrew the front wing mounting screw and remove the front wing.
Install the front wing and all removed parts in the reverse order of removal.
