Characteristics of the car Lada Vesta

The model and number of the car, engine model, weight data, spare parts number, design options and configurations are indicated in the summary plate of the factory data, located on the right pillar, at the bottom, near the threshold

Identification plate of the Lada Vesta car
  • a – name of the manufacturer JSC "AVTOVAZ" (AVTOVAZ);
  • б – vehicle type approval number. It is given in full in the vehicle registration document;
  • в – identification number. The identification number is deciphered as follows:
  • the first three letters, according to international standards, indicate the manufacturer’s code;
  • the next six digits – the vehicle model; letter of the Latin alphabet (or number) – model year of the vehicle;
  • the last seven digits – chassis number (for a passenger car, corresponding to the body number).

In accordance with the Decision of the Customs Union Commission of June 15, 2011 No. 711, the model year is defined as a conditional year specified by the manufacturer (usually following the actual year of vehicle production).

At AVTOVAZ OJSC, the start of the model year is set at July 1 of the calendar year.

Thus, from January 1 to June 30, the model year corresponds to the actual year of vehicle production, and from July 1 to December 31, it corresponds to the year following the actual year of vehicle production;

Engine marking: 1 - engine type; 2 - certification code; 3 - production code; 4 - index number; 5 - code; 6 - serial number
  • г – technically permissible maximum weight of the vehicle;
  • д – technically permissible maximum weight of the road train;
  • е – technically permissible maximum axle weight on the front axle;
  • ж – technically permissible maximum axle weight on the rear axle;
  • з – vehicle designation; и – engine designation;
  • к – spare parts number. The number for spare parts corresponds to the serial number of the vehicle leaving the assembly line.

When ordering spare parts, it is necessary to refer to the information contained on the identification (factory) plate;

л – market circulation sign.

General technical characteristics of the vehicle

Overall dimensions, mm:

  • – length 4410
  • – width 1764
  • – height (with unladen weight) 1497

Vehicle base, mm 2635

Front track, mm 1510

Rear track, mm 1510

Front overhang, mm 860

Rear overhang, mm 915

Approach/departure angle (at full load), deg. 16.6/14.2

Ground clearance (at full load), under engine sump, mm 171

Minimum ground clearance (clearance), at full load, under engine mudguard, mm 144

Luggage compartment volume, dm3 480

Vehicle mass in running order, kg 1230...1270

Distribution of curb mass on front/rear axles, % 60/40

Payload, kg 475

Gross (permitted maximum) mass*, kg 1653

Distribution of gross mass on front/rear axles, % 52/48

Trailer mass with/without brakes, kg 900/450

Fuel consumption (cold start)**, l/100 km:

  • – in the urban cycle 10.13 l/100 km
  • – in the extra-urban cycle 6.0 l/100 km
  • – in the combined cycle 7.51 l/100 km 

Fuel tank capacity, l 55

Tire size 185/65 R15, 195/55 R16

* Weight of the maximum configuration of the car with the driver.

** The specified fuel consumption of the car in the urban, combined and extra-urban cycles, determined in laboratory conditions in accordance with UNECE Regulation No. 101R01. It is used to compare cars from different manufacturers and is not an operational standard.

Actual fuel consumption

The stated fuel consumption of the car in the urban, mixed and suburban cycle is determined in laboratory conditions (using special measuring equipment) in accordance with UNECE Regulation No. 101R01,

It is used to compare cars from different manufacturers and is not an operational standard!

The actual fuel consumption of the car may differ from that declared by the manufacturer due to the impact of various objective and subjective factors on the car: humidity, pressure and temperature of the ambient air, terrain (ups and downs), road surface characteristics, wind direction and speed, precipitation, fraction the composition of the fuel used, the selected gear of the transmission, the duration of the air conditioning system operation (both in driving mode and at idle), the position of the window glass (open/closed), the air pressure in the tires, as well as their dimensions, brand and model, the mass of the transported cargo, including the driver and passengers, the presence of a towed trailer (for transporting goods, boats, snowmobiles, caravans, etc.), its gross weight and aerodynamic drag, the driver's driving style (frequency and intensity of longitudinal and lateral acceleration, average speed of the vehicle), the presence of an automatic start system in the vehicle (including the engine and/or interior heating system), the running-in of a new vehicle (for vehicles with the "Gear Shift Advisor" function, it is recommended to ignore the requirements of the Gear Shift Advisor during the running-in period of the vehicle).

It is also necessary (once a month/quarter) to reset the readings of the on-board computer of the vehicle, since due to prolonged engine idling (traffic jam, long engine warm-up time, etc.) and low vehicle mileage, there is a significant increase in the readings of the on-board computer, which calculates the average fuel consumption based on the hourly engine consumption and the distance traveled by the car (since the last reset of the on-board computer).

The need to reset the on-board computer and the frequency is determined by the driver.

Overall (reference) dimensions of the Lada Vesta

Power plant

Depending on the configuration, the LADA VESTA is equipped with an 8- or 16-valve engine.

The engines are equipped with a rail with injectors in assembly with a single-pipe fuel line, a plastic integrated intake module, a throttle pipe with an electric throttle drive, an exhaust manifold combined with a neutralizer, an automatic tensioner of the timing belt.

The main parameters and characteristics of the engines are given in the table

Engine - 11189:

  • Displacement, cm 3 - 1596
  • Variable valve timing at the intake (VVT) - no
  • Channel length adjustment - no
  • Number of cylinders, pcs - 4
  • Number of valves per cylinder, pcs - 2
  • Distance between cylinders, mm - 89
  • Diameter of cylinders, mm - 82
  • Piston stroke, mm - 75.6
  • Compression ratio - 10.3
  • Gasoline octane number - 95
  • Connecting rod length, mm - 133.32
  • Maximum engine power according to GOST 14846 [4], kW - 64
  • Crankshaft speed at maximum power, min -1 - 5100
  • Maximum torque according to GOST 14846 [4], Nm - 140
  • Crankshaft speed at maximum torque, min -1 - 3800
  • Torque by external speed characteristic at n=1000 min -1, Nm (* – with activated VVT) - 100
  • Torque by external speed characteristic at n=2500 min -1, Nm - 130
  • Minimum idle speed, min -1 - 840
  • Fuel cut-off crankshaft speed, min -1 - 6600
  • EURO-V/VI toxicity standards
  • Minimum cold engine start temperature without additional devices  – 27°С

Engine - 21129:

  • Displacement, cm 3 - 1596
  • Variable valve timing at intake (VVT) - no
  • Channel length adjustment - yes
  • Number of cylinders, pcs - 4
  • Number of valves per cylinder, pcs - 4
  • Distance between cylinders, mm - 89
  • Cylinder diameter, mm - 82
  • Piston stroke, mm - 75.6
  • Compression ratio - 10.45
  • Gasoline octane number - 95
  • Connecting rod length, mm - 133.32
  • Maximum engine power according to GOST 14846 [4], kW - 78
  • Crankshaft speed at maximum power, min -1 - 5800
  • Maximum torque according to GOST14846 [4], Nm - 148
  • Crankshaft speed at maximum torque, min -1 - 4200
  • Torque according to external speed characteristic at n=1000 min -1, Nm (* – with activated VVT) - 104
  • Torque according to external speed characteristic at n=2500 min -1, Nm - 134
  • Minimum idle speed, min -1 - 840
  • Fuel cut-off crankshaft speed, min -1 - 6600
  • EURO-V/VI emission standards
  • Minimum cold start temperature, min -1 - 840
  • Engine fuel cut-off speed, min -1 - 6600
  • EURO-V/VI emission standards
  • Engine fuel cut-off speed, min -1 - 6600
  • EURO-V/VI emission standards
  • EURO-V/VI emission standard ... one engine without additional devices, °C – 27

Engine - HR16:

  • Displacement, cm 3 - 1598
  • Variable valve timing at the intake (VVT) - yes
  • Channel length adjustment - no
  • Number of cylinders, pcs - 4
  • Number of valves per cylinder, pcs - 4
  • Distance between cylinders, mm - 85
  • Cylinder diameter, mm - 78
  • Piston stroke, mm - 83.6
  • Compression ratio - 10.7
  • Octane number of gasoline - 95
  • Connecting rod length, mm - 129.89
  • Maximum engine power according to GOST 14846 [4], kW - 84
  • Crankshaft speed at maximum power, min -1 - 6000
  • Maximum torque according to GOST 14846 [4], Nm - 156
  • Crankshaft speed at maximum torque, min -1 - 4000
  • Torque according to external speed characteristic at n=1000 min -1, Nm (* – with activated VVT) - 104/115*
  • Torque according to external speed characteristic at n=2500 min -1, Nm - 134
  • Minimum idle speed, min -1 - 650
  • Fuel cut-off crankshaft speed, min -1 - 6600
  • EURO-V/VI emission standards
  • Minimum cold engine start temperature without additional devices, °C - 27

Gearbox specifications

Transmission type - 4x2, with front-wheel drive and interwheel differential

MT-2180 gearbox:

Gearbox control drive - cable

Gear numbers=:

  • I - 3.636
  • II - 1,950
  • III - 1.357
  • IV - 0.941
  • V - 0.784
  • ZH - 3,500
  • Main gear - 3.938

Gearbox AMT 2182:

Control drive - Selector with electrical signal;

  • I - 3.636
  • II - 1,950
  • III - 1.357
  • IV - 0.941
  • V- 0.784
  • ЗХ - 3.500
  • Main gear - 3.938

Gearbox MT JH3 510:

Cable control drive

Gear ratios:

  • I - 3.727
  • II - 2.048
  • III - 1.393
  • IV - 1.029
  • V - 0.795
  • ЗХ - 3.545
  • Main gear - 3.867

Weights of engines and gearboxes, kg:

  • Engine 21129 - weight 109.2 kg;
  • HR16 engine - weight 93.4 kg;
  • 2180-MT gearbox - 32 kg;
  • 2182-AMT gearbox - 32.8 kg;
  • JH3510-MT gearbox - 35.0 kg

Nominal filling volumes, l:

Fuel tank - 55 liters

Engine lubrication system:

  • – 21129 (stamped oil pan) - 3.2 (2.9)*
  • – 21129 (cast oil pan) - 4.4 (4,1)*
  • – HR16 - 5.5

Engine cooling and interior heating system**:

– 21129 - 6.4;

– HR16 - 5.5

Gearbox:

  • – KP 2180/2182*** - 2.25
  • – JHQ - 2.34

Clutch and brake hydraulic drive system - 0.559;

Hydraulic brake drive system (for configurations with AMT) - 0.517;

Windshield washer reservoir - 4.7;

Ozone-safe freon R134 "A" in the air conditioning system - 0.475±20

* When changing the oil (with replacing the oil filter).

** It is not allowed to use mixtures of coolants of different brands.

*** The automated gearbox is integrated with the pipeline system and heat exchanger.

Filling this system with working fluid is possible only at dealers.

Spark plugs

For engine 21129 - AU17DVRM; DR15YC-1; FR7DCU; - The gap between the electrodes is 1-1.15 mm;

For engine HR16 - LZKAR7D-9; NGK R - Electrode gap - 0.85-0.95 mm

Lamps used in the car:

Headlight:

  • – High beam lamp - H1
  • – Low beam lamp - H7
  • – Turn signal lamp - РY21W
  • – Daytime running light and parking light lamp - W21/5W

Outer taillight

  • – Brake light and parking light lamp - P21/5W
  • – Turn signal lamp - WY16W

Inner taillight

  • – Reversing light lamp - W16W
  • – Parking light bulb - W5W

Fog light bulb - H16

License plate light bulb - W5W

Glove compartment light bulb - W5W

Trunk light bulb - W5W

Front door sill light bulb - W5W