The oil should be changed after a trip or warmed up.
You need to fill in transmission oil with quality level according to APIGL-5 - 75W90 in the amount of 1.15 liters
To perform the work, you will need a 12 Allen key, a 17 open-end wrench, a container for draining the oil.
We perform the work in an inspection pit or on a lift.
Unscrew the drain plug with a 12 mm Allen key.
Drain the used oil into a container.
There is a magnet on the drain plug, you need to clean it.
Reinstall the drain plug.
Use a 17 key to unscrew the filler plug, which is located on the left side of the front axle housing.
Use a supercharger or syringe to fill oil.
At low temperatures, it is advisable to warm up the oil before filling.
After filling the oil, tighten the filler plug.
The plugs have a conical thread, so gaskets are not used here.
After filling and during any work on the inspection pit or lift, you need to clean the breather located on the right side of the gearbox housing
